Karakteristik empedans, AC sinyalleri (veya yüksek-frekans sinyalleri) içindir. Karakteristik empedans, uzun-hat iletiminde bir kavramdır. İletim hattında sinyal iletimi sürecinde, sinyalin geldiği bir noktada iletim hattı ve referans düzlemi buluşacaktır. Bir elektrik alanı oluşur ve elektrik alanının varlığından dolayı anlık küçük bir akım üretilir ve bu küçük akım iletim hattının her noktasında bulunur. Aynı zamanda sinyal de belirli bir voltaja sahiptir, bu nedenle sinyal iletimi sürecinde iletim hattının her noktası bir dirence eşdeğer olacaktır ve bu direnç bahsettiğimiz iletim hattının karakteristik empedansıdır.

The continuity of the characteristic impedance (ρ) basically depends on the stability of the ratio of the distribution parameters L{{0}} and C0. We all know Ohm's law: U=RI, where R is the resistance or resistance load, in ohms (Ω). Resistance is related to the resistivity (also known as conductivity) of metal materials, but in the process of high-frequency signal transmission, we also need to understand the transmission of the physical medium (such as twisted pair, coaxial wire, waveguide) that transmits high-frequency signals characteristics, which are different from low-frequency signals, this transmission characteristic is related to the conductive material of the transmission medium (such as copper or silver), conductivity (resistivity), geometry (most commonly cylindrical), distributed inductance (L0), distributed capacitance (C0), insulating material (dielectric constant), etc. are all related, but the influence of these distribution parameters and the dielectric constant of insulating material is often not considered during low-frequency signal transmission.






